Panasonic SC-HT60 - Manual (Page 7)

7
RQTV0110
Speaker setup
Step 1
Attaching to a wall
Center speaker
200 mm
Wall or pillar
Other speaker setup options
Fitting optional speaker stands
e.g. Front and surround speakers
5mm, Pitch 0.8 mm
SC-HT40
Use the same screw type for the center speaker.
The stands must be able to support over 10 k
g.
The stands must be stable even if the speakers are in a high position.
•
•
•
335 mm
Secure the cover
at the bottom of
the speaker. 1 Fix screws at 335 mm
apart onto the wall. 3 2 Press the speaker cable
into the groove.
Fasten screws
white
white with blue stripe
SC-HT60
Use new cables when attaching the speakers to the wall.
Front and surround speakers
SC-HT40
7.5 - 9.4 mm
3.0 - 4.0 mm
7.5 -
9.4 mm
30 - 35 mm
4 - 7 mm
3.0- 4.0 mm
Ensure that the screws
are securely positioned
when attaching the
speakers to the wall.
The wall or pillar on which the speakers are to be
attached should be capable of supporting 10 k
g per
screw. Consult a qualified building contractor when
attaching the speakers to wall. Improper attachment
may result in damage to the wall and speakers.
Wall or pillar
SC-HT60
SC-HT40
SC-HT40GN-offset.indb 7 2/27/2006 11:37:31 AM