Powermatic TS29 - Manual (Page 8)

8
Motor ...................................................................... TEFC 7.5HP, 3Ph, 230/460V, 60Hz
Starter ...................................... 230/460V Magnetic w/ 24V low voltage control circuit
Overall dimensions .............................................................. 51-1/4" L x 44" W x 53" H
Table size .................................................................................... 51-1/4" L x 33-1/2" W
Sliding table size ........................................................................ 51-1/4" L x 11-1/4" W
Sliding table travel .............................................................................................. 49-1/4"
Tilting spindle ........................................................... 5 degree back, 45 degree forward
Spindle travel ............................................................................................................... 7"
Spindle speed ................................................................... 3000-4000-6000-8000-10000
Spindles ..................................... interchangeable: 1-1/4" x 6"; 1" x 6"; 3/4" x 3-1/4";
and 1/2" collet chuck with 1/4" bushing
Table inserts (three) ............................................... 2-1/2" I.D.; 5-1/2" I.D.; Oval slotted
Dust outlet ......................................................................................................... (two) 5"
Net weight ........................................................................................................ 1183 lbs.
SPECIFICATIONS: Model TS29 Spindle Shaper
NOTE: The above specifications were current at the time this manual was published, but because of our policy
of continuous improvement, Powermatic reserves the right to change specifications without notice and without
incurring obligations.