Panasonic GPH5D - Manual (Page 77)

78
Initialization Pulse Adjust
Item / Preparation
•
Input a Crosshatch signal.
•
Set the picture mode to Normal and the White Balance to Normal
Adjustments
Adjust the indicated test point for the specified waveform. Use TPSS1 as the
trigger source.
Test point Volume Level
T1 TPSC1 (SC) R6523 (SC-Board) ? 0
T2 TPSC1 (SC) R6557 (SC-Board) 170 ±20µ Sec
Figure 67