Manual mcacc setup, Fine channel level, The system setup menu 07 – Pioneer VSX1017TXV User Manual

Page 36

Advertising
background image

The System Setup menu

07

36

En

Manual MCACC setup

You can use the settings in the Manual MCACC setup
menu to make detailed adjustments when you’re more
familiar with the system. Before making these settings,
you should have already completed

Automatically setting

up for surround sound (Auto MCACC)

on page 8.

You only need to make these settings once (unless you
change the placement of your current speaker system or
add new speakers).

Important

• For some of the settings below, you’ll have to connect

the setup microphone to the front panel and place it
about ear level at your normal listening position.
Press

SETUP

to display the System Setup menu

before you connect the microphone to this receiver. If
the microphone is connected while the System Setup
menu is not being displayed, the display will change
to the Auto MCACC setup menu. See

Problems when

using the Auto MCACC Setup

on page 10 for notes

regarding background noise and other possible
interference.

• If you’re using a subwoofer, switch it on and turn up

the volume as necessary.

Caution

• The test tones used in the MCACC setup are output

at high volume.

1

Select ‘Manual MCACC’ from the System Setup

menu.

See

Making receiver settings from the System Setup menu

above if you’re not already at this screen.

2

Select the setting you want to adjust.

If you’re doing this for the first time, you might want to
make these settings in order.

Fine Ch Level

– Make fine adjustments to the overall

balance of your speaker system (see

Fine Channel

Level

below).

Fine SP Distance

– Make precise delay settings for

your speaker system (see

Fine Speaker Distance

on

page 37).

Advanced EQ Setup

– Calibrate your system based

on the direct sound coming from the speakers and
make detailed settings according to your room’s
reverb characteristics (see

Setting the Acoustic

Calibration EQ automatically

on page 38).

EQ Data Copy

– Copy Acoustic Calibration EQ

settings for manual adjustment (see

Copying your

Acoustic Calibration EQ settings

on page 38).

EQ CUSTOM1/2 Adjust

– Make detailed manual

adjustments to your custom Acoustic Calibration EQ
settings (see

Setting the Acoustic Calibration EQ

manually

on page 39).

EQ Data Check

– Check the

ALL CH ADJUST

,

FRONT ALIGN

and custom settings using the on-

screen display (see

Checking your Acoustic

Calibration EQ settings

on page 39).

Fine Channel Level

• Default setting:

0.0dB

(all channels)

You can achieve better surround sound by properly
adjusting the overall balance of your speaker system. The
following setting can help you make detailed
adjustments that you may not achieve using the

Manual

speaker setup

on page 40.

1

Select ‘Fine Ch Level’ from the Manual MCACC

setup menu.

After the volume increases to the reference level, test
tones will be output.

2

Adjust the level of the left channel, press ENTER.

This will be the reference speaker level, so you may want
to keep the level around

0dB

so that you’ll have plenty of

room to adjust the other speaker levels.

3

Select each channel in turn and adjust the levels

(+/–10dB) as necessary.

Use

/

to adjust the volume of the speaker you

selected to match the reference speaker.

When it sounds like both tones are the same volume,
press

to confirm and continue to the next channel.

System Setup

1.Surr Back System
2.Auto MCACC

3.Manual MCACC

4.Manual SP Setup
5.Input Assign
6.Other Setup

: Exit

3.Manual MCACC

:Return

a.Fine Ch Level

b.Fine SP Distance
c.Advanced EQ Setup
d.EQ Data Copy
e.EQ CUSTOM1 Adjust
f .EQ CUSTOM2 Adjust
g.EQ Data Check

3.Manual MCACC

:Return

a.Fine Ch Level

b.Fine SP Distance
c.Advanced EQ Setup
d.EQ Data Copy
e.EQ CUSTOM1 Adjust
f .EQ CUSTOM2 Adjust
g.EQ Data Check

3a.Fine Channel Level

Please Wait... 20

Caution!
Loud test tones
will be output.

:Cancel

3a.Fine Channel Level

MCACC:M1. MEMORY 1

L(Reference)

+0.5dB

Enter:Next

:Cancel

3a.Fine Channel Level

L +

0.0dB

(Reference)

R [

0.0dB

]

C

+ 1.0dB

SL [

-3.0dB

]

SR

[+ 10.0dB ]

SBL

[– 10.0dB ]

SBR

[+ 9.5dB ]

SW

[– 1.5dB ]

:Finish

VSX-1017TXV_KU.book 36 ページ 2007年4月12日 木曜日 午前11時32分

Advertising