Panasonic TU-IRD20 - Manual (Page 47)

REFERENCE
43
Home View
These parts are inside of or attached to your house.
Satellite Dish Picks up the satellite’s coded program information
and relays it to your satellite receiver. (Your satellite dish may be
installed in different locations on or around your house. The
satellite dish must, however, be pointed in a southern direction
toward the satellite.)
Satellite Receiver Receives the TV program information and sends
it to your TV or VCR.
Telephone Jack Connects to the phone jack on the back of the
satellite receiver. The satellite receiver uses a toll-free number once
a month to update your access card. This update only takes a few
seconds and ensures that you will have continuous service. The
system automatically hangs up if you pick up the phone when the
satellite receiver is calling out.
Television If your television is remote controllable, you can
program the remote to change channels and volume.
Home Theater Universal Remote (included with your DSS ® system)
Controls the DSS ® system as well as most remote controllable
TVs, VCRs, and other devices. You may need to program the remote
to control specific brands of devices you own.
Access Card (installed in satellite receiver) Must be inserted for
you to use the DSS
® system! Provides system security and
authorization of DSS ® services. Do not remove the card except
when issued a new card as a replacement for the original.
Satellite Dish DSS Receiver Telephone Jack
Remote Control
Access Card
and Security Clip