Panasonic DMR-EH575 - Manual (Page 66)

66
RQT8881
Changing the unit’s settings
(continued)
Refer to the control reference on page 62.
Tabs Menus Options (Underlined items are the factory presets.)
Connection
(continued) AV2 Settings (Set to match the connected equipment.)
≥Press [OK] to show the following settings.
AV2 Input
Set to “RGB/Video” or “RGB” when receiving or recording
RGB output from external equipment. ≥RGB/Video ≥RGB
≥Video ≥S Video
AV2 Connection
This setting is fixed with “Ext” if you set “TV System” to
“NTSC” (
➡ 68).
≥Decoder:When a decoder is connected to descramble the
scrambled signals (e.g., C+decoder).
≥Ext: When the VCR or a digital/satellite receiver is
connected.
Ext Link
This setting cannot be made when the “TV System” is set to
“NTSC” (
➡ 68).
≥Ext Link 1: When a digital/satellite receiver which transmits a
special control signal recordings via the 21-pin Scart
cable is connected.
Start and stop timings of recording are controlled by
the control signal.
≥Ext Link 2: When external equipment with a timer function is
connected.
When it turns on, recording starts.
When it turns off, recording stops.
Others Remote Control ( ➡ 25) ≥DVD 1 ≥DVD 2 ≥DVD 3
Clock ( ➡ 69)
Power Save
≥Refer to the following when “Power Save” is set to “On”.
–“FL Display” is automatically set to “Automatic” ( ➡ 65).
–The “Quick Start” function does not work. (It is automatically
turned to “Off”.)
–When the unit is off, Pay TV programmes cannot be watched
on the TV because the signal from the connected decoder is
not looped through. To watch them, turn on the unit.
≥On: Power consumption is minimized when the unit is turned to
standby ( ➡ 82).
≥Off:
(If “Quick Start” is set to “On”, “Power Save” is automatically
turned to “Off”.)
Quick Start
The Quick Start feature enables this unit to be ready to start
recording as quick as approx. 1 second
§ after turning it on. You
can start recording soon after deciding you want to record
something.
§ Only when recording to the HDD or DVD-RAM.
≥Startup takes up to a minute when:
–You play a disc or start recording to discs other than DVD-
RAM.
–You want to make other operations.
–The clock has not been set.
≥On
≥Off:
Standby power consumption is less than when this is set
to “On”.
(If this is set to “On”, “Power Save” is automatically turned to
“Off”.)
DivX Registration
≥You need this registration code to purchase and play DivX Video-on-Demand (VOD) content (
➡ 41).
Initialize
≥Press [OK] to show the following settings.
Shipping Condition ≥Yes ≥No
All the settings except for the ratings level, ratings password and time settings return to the factory preset. The timer recording
programmes are also cancelled.
Default Settings ≥Yes ≥No
All the settings other than the programmed channels, time settings, country settings, language settings, disc language settings,
ratings level, ratings password, remote control code, return to the factory presets.
EH575.book Page 66 Tuesday, January 30, 2007 10:30 AM