Panasonic DMR-EH575 - Manual (Page 68)

68
RQT8881
Changing the unit’s settings
Refer to the control reference on page 62.
You can restart auto channel setting if set up ( ➡ 20) fails for some reason.
After performing steps 1–4 ( ➡ 67)
5
Press [ 3, 4] to select “Auto-Setup
Restart” or “Download from TV” and
press [OK].
The confirmation screen appears.
Select “Download from TV” when you connect the unit to a Q
Link compatible TV with a fully wired 21-pin Scart cable.
(Programme positions are downloaded from the TV and
copied through this convenient function.)
6
Press [ 2, 1] to select “Yes” and
press [OK].
≥If the country setting menu appears on the television
Press [ 3, 4, 2, 1] to select the country and press
[OK].
You can also use the following method to restart Auto-Setup.
When the unit is on and stopped
Press and hold [
X CH] and [CH W] on the main unit until the
country setting screen appears.
All the settings except for the ratings level, ratings password and
time settings return to the factory preset. The timer recording
programmes are also cancelled.
To return to the previous screen
Press [RETURN].
To exit the screen
Press [EXIT].
When the GUIDE Plus+ system setting message appears.
≥If you want to setup the GUIDE Plus+ system
Press [ 2, 1] to select “Yes” and press [OK].
Go to step 2 on page 21.
≥If you do not want to setup the GUIDE Plus+ system
Press [ 2, 1] to select “No” and press [OK].
Television picture appears. Setup is complete.
List of TV Reception Channels
§ Only for 8 MHz channel raster
Change the setting to match the equipment you are connecting with,
or to match the title when there are both PAL and NTSC titles on the
HDD.
1
While stopped
Press [FUNCTION MENU].
2
Press [ 3, 4] to select “To Others”
and press [OK].
3
Press [ 3, 4] to select “Setup” and
press [OK].
4
Press [ 3, 4] to select “Connection”
and press [ 1].
5
Press [ 3, 4] to select “TV System”
and press [OK].
6
Press [ 3, 4] to select the TV system
and press [OK].
≥PAL (factory preset)
–Select when connecting to a PAL or Multi-system
television. Titles recorded using NTSC are played as PAL
60.
–Select to record television programmes and PAL input from
other equipment.
– [HDD] Select when playing a PAL input title recorded on the
HDD.
≥NTSC
–Select when connecting to a NTSC television. Television
programmes cannot be recorded properly.
–Select to record NTSC input from other equipment.
–
[HDD] Select when playing a NTSC input title recorded on
the HDD.
7
Press [ 2, 1] to select “Yes” and
press [OK].
To return to the previous screen
Press [RETURN].
To exit the screen
Press [EXIT].
∫ To change the setting all at once (PAL !# NTSC)
While stopped, keep pressing [ ∫] and [< OPEN/CLOSE] on the
main unit for 5 or more seconds.
[Note]
≥This unit cannot record to discs containing both PAL and NTSC
signals. (However, both types of programmes can be recorded
onto the HDD.)
≥If “NTSC” has been selected, the GUIDE Plus+ system cannot be
used.
Auto-Setup Restart
Channel indication
TV Channel
Germany/Italy Other Countries
2 – 4
E2 – E10
E2 – E12
5 – 10
11 – 12
E11 – E12
(Germany)
H1 – H2 (Italy)
13 – 20 A – H (Only Italy) —
21 – 69 E21 – E69 E21 – E69
74 – 78 S01 – S05 S1 – S5
80 S1 M1
81 – 89 S2 – S10 M2 – M10
90 – 99 S11 – S20 U1 – U10
121 – 141
S21 – S41 §
(Hyperband)
S21 – S41
(Hyperband)
TV System
Setup TV System
PAL
NTSC
Disc
Picture
Sound
Display
Tuning
Connection
Others
OK RETURN
SELECT
EH575.book Page 68 Tuesday, January 30, 2007 10:30 AM