Panasonic WV-CLR920A - Manual (Page 29)

-29-
2. Move the cursor to the character you want to edit
by pressing
L/M/J/K.
3. After selecting the character, press I. The
selected character appears in the editing area.
(The pointer in the editing area moves to the right
automatically at this moment.)
4. Repeat the steps above until all characters are edit-
ed.
To enter a blank space in the CAMERA ID
Move the cursor to SPACE and press
I.
To replace a specific character in the CAMERA ID
1. Move the cursor to the editing area by pressing
K.
2. Move the pointer to the character to be replaced by
pressing
L or M. Then move the cursor to the
character area and select a new character.
3. Press I to determine the CAMERA ID.
To erase all characters in the editing area
Move the cursor to RESET and press
I. All charac-
ters in the editing area disappear.
To determine the display position of the CAMERA ID
1. Move the cursor to POSI, and press
I. The dis-
play shown below appears and the CAMERA ID is
highlighted.
2. Move the CAMERA ID to the desired position by
pressing
L/M/J/K.
3. Press I to fix the position of the CAMERA ID.
The mode returns to the previous CAMERA ID
menu.
Notes:
• The CAMERA ID stops at the edges of the mon-
itor screen.
• The CAMERA ID moves faster if any of
L/
M/J/K is kept pressed for a second or
more.
2. Light Control Setting (ALC/ELC)
You can select the mode for adjusting the lens iris.
The modes are as follows:
WV-CLR920A
Highlighted