Figure 5-4 – PSC PT2000 User Manual
Page 87
Using Portable File Transfer Program (PTFER)
User’s Guide
77
Figure 5-4: The Communications Settings dialog box
2.
To use a different COM port, select it in the
Port
options group.
3.
Use this dialog box to switch baud rate, the number of stop bits,
and the type of parity. (Use the settings which match the settings
used in the PT2000 or TopGun.)
4.
When finished, click on the
Connect
button to connect to the
port, or select
OK
and then use the
Connect
command in the
menu to make the connection.
Note:
When a connection has been made to the serial port, the
Settings
option is dimmed on the menu and cannot be
selected. Select
Options > Connect
again to disconnect the
application, and then select
Options > Settings
again.
PT2000.book Page 77 Thursday, February 26, 2004 9:34 AM