Turning on the portable, Setting the time and date, Figure 3-1 – PSC PT2000 User Manual
Page 29
Getting Started
User’s Guide
19
Figure 3-1: The input connector on the PT2000
Turning On the Portable
Turn the PT2000 or TopGun on by pressing the green
<I/O>
button.
The display screen returns to the view displayed when it was turned off.
Setting the Time and Date
Figure 3-2: The Time and Date Display
When turning the portable on for the first time, the display screen
shows the date currently loaded in memory. If the displayed date is
correct, press the
<ENTER>
key. If the date is wrong, enter the correct
date. Use two digits each for the month, for the day, and for the year
(e.g.,
020101
). Press
<ENTER>
for the program to automatically format
the entry (e.g.,
2/01/01
).
Figure 3-3: The Current Time Display
The next display screen shows the time currently loaded in the portable’s
memory. If the displayed time is correct, press the
<ENTER>
key. If the
time is wrong, enter the correct time. Use two digits each for the hour,
for the minute, and for the seconds (e.g.,
133000
). If the portable’s
Welp clip
Current Date:
02/01/02
Enter New Date:
¤
Current Time:
09:17:32
Enter New Time:
¤
PT2000.book Page 19 Thursday, February 26, 2004 9:34 AM