Using programming utilities, Percprog – PSC PT2000 User Manual
Page 69
Using Programming Utilities
User’s Guide
59
Using Programming Utilities
The PSC portable comes with a collection of applications and utilities
on a disk. This collection is called the Portable Applications Library, or
PAL. Two of the utilities,
PDPROG
and
PERCPROG
, enable
programming of the portable from DOS or Windows.
Both programming utilities check the version number of the portable’s
operating system. If it is different from the PAL version, it installs the
operating system along with the application.
PERCPROG
PERCPROG
is the utility used to program a PSC portable through
Windows.
To customize the installation of an application, complete the following
steps:
1.
Connect the portable to the PC (refer to
for information
on getting started.).
2.
Double-click on the
Portable Programmer
icon in the PSC PAL
program group. The PSC
Portable Programmer
window will
).
Note:
For complete information about PAL, including installation
instructions, refer to the Falcon Portable Applications
Library (PAL) User’s Guide.
Note:
The figures in this chapter show the utilities in Windows 95.
When using a different version of Windows, the utility
windows may look slightly different.
PT2000.book Page 59 Thursday, February 26, 2004 9:34 AM