Overview – PSC PT2000 User Manual
Page 96
Programming Parameters
86
PT2000™ & TopGun™
Overview
This appendix provides information about all programmable settings for
the PT2000 and TopGun.
z
lists programming ID numbers for predefined defaults
(refer to
).
z
lists save-and-exit settings (refer to
).
z
provides the following information (refer to
):
Code Parameter
:
is the “human” name for programming options.
ID #
:
is the “portable” name for programming options. For example, to
set a Code 39 minimum label length, enter
01
when programming the
portable. Programming ID numbers given in this appendix can be used
with all programming methods.
Type
:
tells what kind of setting to use for each code parameter:
On/Off
:
is a toggle.
1
turns the parameter on, and
0
turns it off.
Value
:
requires a two-character entry (e.g.,
02
for two beeps after each
good read, or
05
for a length of five).
String
:
uses one or more ASCII characters, followed by
//
to indicate
the end of the string.
Immediate
:
takes effect as soon as the ID number is entered.
Acceptable Input
:
gives the settings or range of settings that you can
use for each code parameter.
Note:
For information about programming, refer to
.
Note:
For explanations of some general programming parameters,
refer to
. For explanations of serial parameters, refer
to
.
PT2000.book Page 86 Thursday, February 26, 2004 9:34 AM