Idc™ 150t – Peavey IDC 150T II User Manual
Page 3
3
IDC™ 150T
II
TM
®
Congratulations on your purchase of the IDC™ 150T
II
. The IDC™ 150T
II
power amplifier is a three rack
space, solid state, mono power amplifier capable of delivering more than 150 W RMS. The unit has been designed to
be reliable, meeting the needs of most fixed installation applications. One of the most significant features of this
amplifier is its battery backup capability. This amplifier will operate with a 24 V DC external power source as well as
120 V AC power. This means if the AC power mains are lost, the amplifier can still function.
Fully isolated 25 volt and 70 volt line output capabilities are provided with this amplifier. SPS™ compression
is also provided to help eliminate distortion due to clipping. A balanced 600 ohm line out is available to provide signal
to additional amplifiers.
FRONT PANEL FEATURES:
SPS™ LED INDICATOR (1)
When the SPS™ compression is active, this indicator illuminates to show that the amplifier is being overdriven to the
point that the signal runs out of headroom.
POWER LED INDICATORS: MAINS (2) & 24 V DC (3)
Mains: Illuminates green when AC main power is supplied to the amplifier and the main power switch is turned on.
24 V DC: Illuminates red when the DC power is connected and the power switch turned on.
AC POWER SWITCH (4)
Depress to “on” position to turn on amplifier.
DC POWER SWITCH (5)
Depress to “on” position to enable DC backup power.
Note: With both AC and DC power switches turned on and sufficient AC voltage being supplied, the amplifier does not
draw any current from the DC supply.