PhatNoise KDC-MP8029 - Manual (Page 32)

32 | English
Menu system
In Standby mode
Date Adjustment
1 Select Date Adjust mode
Push the knob to [FM] or [AM].
Select the "Date Adjust" display.
2 Enter Date Adjust mode
Press the Control knob for at least 1 second.
The date display blinks.
3 Selecting the item (day, month, or year) to
adjust
Push the Control knob to [
4] or [¢].
The items that are blinking are items that can be
adjusted.
4 Adjust each item
Push the Control knob to [FM] or [AM].
5 Repeat step 3 and 4 operation and adjust the
date.
6 Exit Date adjustment mode
Press the [MENU] button.
In Standby mode
Date Mode
Setting the date format.
1 Select Date Mode
Push the Control knob to [FM] or [AM].
Select the "Date Mode" display.
2 Select the date format
Push the Control knob to [ 4] or [¢].
3 Exit Menu mode
Press the [MENU] button.
In Standby mode
DSI (Disabled System Indicator)
A red indicator will blink on the unit after the
faceplate is removed, warning potential thieves.
Display Setting
"DSI : ON" LED flashes.
"DSI : OFF" LED OFF.
In Standby mode
Selectable Illumination
Selecting the button illumination color as green
or red.
Display Setting
"Button : Green" The illumination color is green.
"Button : Red" The illumination color is red.
In Standby mode
Dimmer
Dimming this unit’s display automatically when
the vehicle light switch is turned ON.
Display Setting
"Dimmer : ON" The display dims.
"Dimmer : OFF" The display doesn’t dim.
Function of the KDC-MP8029
In Standby mode
Switching preout
Switching the preout between the rear and
subwoofer. (In subwoofer it outputs without
effect from the fader control.)
Display Setting
"SWPRE : Rear" Rear preout.
"SWPRE : Sub-W" Subwoofer preout.
In Standby mode
Built-in Amp Setting
Built-in amplifier is controlled.
Turning OFF this control enhances the preout
quality.
Display Setting
"AMP : ON" The built-in amplifier activates.
"AMP : OFF" The built-in amplifier deactivates.