Panasonic KX-HGW200 - Manual (Page 41)

41
For assistance, please call: 1-800-272-7033
Using the
Web Screen
“
PPPoE Connection
The PPPoE Connection command allows you to manually initiate/stop your
KX-HGW200 PPPoE connection to the ISP. Depending on the PPPoE
connection status, two different kinds of web screens appear. You can
initiate/stop the PPPoE connection by clicking the button on the web
screen.
When the PPPoE connection is being made
The window below appears.
1 To disconnect the PPPoE connection, click
[Disconnect]
.
When the PPPoE connection is not being made
The window below appears.
1 To initiate the PPPoE connection, click
[Connect]
.
Note:
To use this command, the PPPoE connection of your KX-HGW200
must have been set to Automatic or Manual on the KX-HGW200
administration web screen. See p. 34 for more detail information.
PQQX12817ZA P30-45 01.3.8 3:21 PM y [ W 41