Panasonic KX-HGW200 - Manual (Page 55)

For assistance, please call: 1-800-272-7033
Useful Information
55
“
Setup of a Macintosh Computer
The steps below are for Mac OS 9.0.
1 Turn on the computer.
2 From the Apple menu, select Control Panels.
3 From the Control Panels menu, select TCP/IP.
The TCP/IP dialog box appears.
4 Select Ethernet from the Connect via pop-up menu.
5 Select Manually from the Configure pop-up menu.
6 Enter a local IP address, Subnet mask, Router address and
Name server address for the computer in the appropriate data
field.
≥ The Subnet mask is normally entered as “255.255.255.0”. If you
intend to access the web screen of the KX-HGW200, you
should make this parameter the same as that of the
KX-HGW200 home side netmask.
≥ In the Router address data field, enter “192.168.0.254” (default
local IP address of the KX-HGW200).
≥ When you change the local IP address of the KX-HGW200, you
have to change it in the Router address data field also.
(Continued “ )
PQQX12817ZA P46 - 58 01.3.8 3:22 PM y [ W 55