Panasonic NV-FJ610 - Manual (Page 16)

16
To Change a Timer Recording
Programming
It is not possible to change a programming while the timer
recording is being performed.
³ Display the VCR picture on the TV.
³ Set the VCR/TV switch N to “VCR”.
1
Press the PROG./CHECK button
< to display the timer
recording programmings on the TV screen.
2 Press the Cursor buttons ( 34) P to select the
programming that you want to change.
3 Follow the operations below to change the programmed
contents.
To change the broadcasting station:
Use the Channel buttons :.
To change the date of
the timer recording:
Use the DATE button
;.
To change the recording
starting time:
Use the ON button
F.
To change the recording ending time:
Use the OFF button E.
To change the recording speed:
Use the SP/LP button D.
4 Press the OK button R to conclude the setting.
5 Press the EXIT button Q to exit the On Screen Display.
To Cancel the Programming of a Timer
Recording
It is not possible to cancel a programming while the timer
recording is being performed.
³ Display the VCR picture on the TV.
³ Set the VCR/TV switch N to “VCR”.
1
Press the PROG./CHECK
button
< to display the timer
recording programmings on the
TV screen.
2 Press the Cursor buttons ( 34) P to select the
programming that you want to cancel.
3 Press the CANCEL > button.
4 Press the EXIT button Q to exit
the On Screen Display.
ZDF 27/10 20:00 21:30 SP ON
ARD 30/10 19:00 20:00 LP ON
N3 Su 21:00 23:30 SP ON
ZDF Su-Sa 17:30 18:00 LP ON
jjjjj jj /jj jj : jj jj : jj jj jjj
jjjjj jj jj jj jj jj jj jj jjj
jjjjj jj jj jj jj jj jj jj jjj
jjjjj jj jj jj jj jj jj jj jjj
Pos Start Stop SP VPS
Name DATE ON OFF LP PDC
Timer recording
VCR
ZDF 27/10 20:00 21:30 SP ON
ARD 30/10 19:00 20:00 LP ON
jjjjj jj /jj jj : jj jj : jj jj jjj
ZDF Su-Sa 17:30 18:00 LP ON
jjjjj jj /jj jj : jj jj : jj jj jjj
jjjjj jj jj jj jj jj jj jj jjj
jjjjj jj jj jj jj jj jj jj jjj
jjjjj jj jj jj jj jj jj jj jjj
Pos Start Stop SP VPS
Name DATE ON OFF LP PDC
Timer recording
VCR
Notes for Cancelling the Programming of a Timer
Recording
In some cases, for example as listed below, the
programming of a timer recording remains stored in the
memory until 4 a.m. the next day. However, this is not a
malfunction.
³ When a timer recording was not performed up to the TV
programme’s ending time because the remaining tape
time was not sufficient.
³ When you have stopped the timer recording while it was
being performed.
ZDF 27/10 20:00 21:30 SP ON
ARD 30/10 19:00 20:00 LP ON
N3 Su 21:00 23:30 SP ON
ZDF Su-Sa 17:30 18:00 LP ON
jjjjj jj /jj jj : jj jj : jj jj jjj
jjjjj jj /jj jj : jj jj : jj jj jjj
jjjjj jj /jj jj : jj jj : jj jj jjj
jjjjj jj jj jj jj jj jj jj jjj
Pos Start Stop SP VPS
Name DATE ON OFF LP PDC
Timer recording
VCR
This VCR can display a list of the timer-recorded
programmes on the inserted video cassette on the TV screen.
You can then select the desired programme, and the VCR
will quickly locate its beginning and start playback.
Conditions for correct operation of the Programme List
Search function:
³ The video cassette must not have been ejected after the
timer recordings were performed.
³ The tape length of the inserted cassette must be set
correctly.
³ The VCR must not be in the timer recording standby mode.
³ A programme of at least 15 minutes must be recorded on
the tape.
³ If a timer recording was performed onto a recorded video
cassette, the previous recording must have been
completely erased by the new recording.
Preparation
³ Display the VCR picture on the TV.
Operations
1
Press the SEARCH button
L to
display the Programme List
menu.
2 Press the Cursor buttons ( 34) P to select
the programme that you want to locate and play back.
3 Press the SEARCH button
L to start the search
for the beginning of the selected programme.
³ After the desired recorded programme has
been found, playback star ts automatically.
³ If, after playback has started, you want to search
for the beginning of the same or another programme,
press the SEARCH button
L.
Playback stops, and the Programme List menu appears.
Repeat the above operations steps 2–3.
Hints:
³ When you press the SEARCH button L in the operation
step 1, the last timer-recorded programme is selected
(highlighted).
³ If you take out the cassette or insert another cassette after
a timer recording has finished, pressing the SEARCH
button
L activates the Intro-Jet Scan instead of the
Programme List Search. (Refer to page 17.)
³ If you programme linked timer recordings, Programme List
Search function does not work.
Programme List
Pos Name Date Start
2 ZDF 27/10 17:46
3 ARD 28/10 15:00
VCR
To select a Timer-Recorded Programme
from the List and Quickly Locate Its
Beginning for Automatic Playback
(Programme List Search)
To Cancel the Programme List Search:
Press the EXIT
Q button.
To Check the Total Timer Recording
Programming Time
The total time indication for timer
recording programming lets you
check how many programmes can be
recorded by comparing with the
remaining tape time in the VCR
display.
³ The total time is calculated in the SP mode.
³ The total time cannot be calculated when setting Daily/
Weekly timer recording.
Indication for a total timer
recording programming time
of 90 minutes
Total (SP) 90min
jjjjj jj jj jj jj jj jj jj jjj
jjjjj jj jj jj jj jj jj jj jjj
jjjjj jj /jj jj : jj jj : jj jj jjj
jjjjj jj /jj jj : jj jj : jj jj jjj
jjjjj jj /jj jj : jj jj : jj jj jjj
jjjjj jj /jj jj : jj jj : jj jj jjj
jjjjj jj /jj jj : jj jj : jj jj jjj