Panasonic NV-FJ610 - Manual (Page 24)

24
To Return the VCR to the Shipping
Condition
If you want to reset the VCR to the factory preset condition,
follow the operation steps below.
1 Press the MENU button S to display the Main menu
on the TV screen.
2 Press the Cursor buttons (34) P to select “Tuning”
then press the OK button R.
3 Press the Cursor buttons
(34) P to select “Shipping
condition” then press the OK
button R to prepare for
resetting the VCR to the
shipping condition.
4 Press the OK button R to actually change the settings
back to the shipping condition.
≥
To re-tune the VCR, disconnect and reconnect the AC
Mains Cable.
Restarting the Auto Setup/
Resetting the VCR to the Shipping Condition
Performing Auto Setup automatically tunes all TV stations
available in your area for the VCR.
Restarting this function is convenient when you move to
another area and may need to set up the VCR again.
To Restart the Auto Setup
To perform the Auto Setup again, follow the operation steps
below.
1 Press the MENU button S to display the Main menu on
the TV screen.
2 Press the Cursor buttons
(34) P to select “Tuning”
then press the OK button R.
3 Press the Cursor buttons (34) P to select “Auto-Setup
Restart” then press the OK button R to prepare for Auto
Setup start.
4 Press the OK button R again to
actually start the Auto Setup.
Manual
Auto-Setup Restart
Shipping condition
Tuning
VCR
Country
Tuning : others
: Ch 21
Auto-Setup
VCR
Manual
Auto-Setup Restart
Shipping condition
Tuning
VCR