PSC Falcon 4400 Series - Manual (Page 18)

Mounting Options
12
Falcon ® 4400 Series Powered Vehicle Dock
Components, Materials and Tools
• Ram Ball Assembly (sold separately)
• 8 screws and nuts for mounting Ram Ball (supplied)
• Phillips head screwdriver
Ram Ball Assembly (sold separately)
1. Loosen the large adjustment knob handle on the Ram Ball assembly.
2. Remove both Ram Balls from the mount as demonstrated in Figure 7.
Figure 7. Ram Ball Assembly
3. Use four screws (customer supplied) to secure one of the Ram balls to
the desired mounting surface. Set the other Ram ball aside to use later in
the assembly process.
4. Re-attach the Ram Ball Assembly to the Ram Ball you just affixed to the
mounting surface.
Ram Balls Adjustment
Knob
Screws