Dear customer, Accessories, Plug in auto tuning – Panasonic AG-1340P User Manual

Page 2

Advertising
background image

2

AUTO CHANNEL SET

PROCEEDING

END

: MENU

2

Dear Customer

Thank you for purchasing this Panasonic
Video Cassette Recorder.

We strongly suggest that you carefully study
the Operating Instructions before attempting to
operate the VCR, and that you note the listed
precautions.

ACCESSORIES

1 pc. Remote Controller
1 pc. Coaxial Cable
1 pc. AC Power Cord
2 pcs. “AA” size Batteries

Press [POWER Í/I (VCR Í)] to switch the
VCR from on to standby mode or vice versa.
In standby mode, the VCR is still connected to
the main AC power.

Plug in Auto Tuning

Setting image illustration

Antenna

TV

Connect the
Antenna
cable.

Connect the
AC power
cord.

Press POWER Н

Н

Н

Н

Н

/I button.

On Screen display

Plug in Auto
Tuning is
completed.

All broadcasting stations that can be received in the area are automatically tuned and stored in
memory.
– Do not turn off the VCR halfway. (See pages 12–15.)

FCC NOTE:

This equipment has been tested and found
to comply with Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the
instructions, may cause harmful
interference to radio communications. If this
equipment does cause or receive
interference, which can be determined by
turning equipment off and on, the user is
encouraged to try to correct the interference
by one of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the

equipment and receiver.

– Connect the equipment into an outlet on a

circuit different circuit from that to which
the receiver is connected.

– Consult the dealer or an experienced

radio/TV technician for help.

FCC Caution: Any changes or modifications
not expressly approved by the party
responsible for compliance could void the
user’s authority to operate this equipment.

Trade Name:

Panasonic

Model No.:

AG-1340P

Responsible party:
Matsushita Electric Corporation of America
3330 Cahuenga Blvd. West, Los Angeles,
CA 90068
Support Contact:
Panasonic Broadcast & Television Systems
Company 1-323-436-3500

This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful
interference, and
(2) this device must accept any inteference
received, including interference that may
cause undesired operation.

Advertising