Panasonic AG-1340P - Manual (Page 35)

35
Advanced Operations
TIMER REC
REC/OTR PICTURE MODE 6 5
EJECT
SEARCH / REW FF /
STOP PLAY
TV
VCR
VOLUME
AV
INPUT SELECT VCR/TV
RESET OSD/DISPLAY
PICTURE MODE REC
TIMER
Á
NAVI
PROG/CHECK SPEED
ON
r
s
OFF
r
s
DATE
r
r
s
W
W
X
s X
W
X
SEARCH
CANCEL
INDEX
OK
AUDIO
∫
1
3
4
2 1 5 6
9 ¥ :
Н
Н
; /D
MENU
1 2 3 4
Other Functions
Tracking Adjustment and
Vertical Locking Adjustment
– For manual tracking adjustment
The
I and J buttons are used to adjust the
tracking when, for example, noise bars on the
picture during normal playback are better
removed manually than by automatic digital
tracking control. To return to automatic digital
tracking control, press both buttons together.
– For slow tracking adjustment
When noise bars appear during still or slow
playback, switch over to slow playback and
adjust with the
I and J button to reduce
the noise bars.
– For vertical locking adjustment
Use the
I and J buttons to minimize any
vertical jitter during still picture playback.
Other Automatic Functions
Automatic Playback
When a video cassette without an erasure
prevention tab is inserted, the VCR starts
playback automatically.
VCR-off Playback
When the VCR is off, an inserted video
cassette can be played back by pressing
[PLAY].
Automatic Rewinding
When the tape reaches its end during recording
(except for timer recording) or playback, it will
automatically be rewound to the beginning.
During OTR, this function will not work.
Automatic Switching Off and
Ejection
When the VCR is switched off, an inserted
video cassette can be ejected by simply
pressing [EJECT]. The VCR will eject the video
cassette and automatically turn itself off again.
S-VHS Quasi Playback (SQPB)
It is also possible to play back tapes recorded
in the S-VHS system.
– Some picture noise may occur depending on
the type of tape used.
– It is not possible to fully obtain the high
resolution that S-VHS is capable of.
– It is not possible to record in the S-VHS
system with this VCR.