3 front panel display, Cabling – Pixel Magic Systems MTV5000 User Manual
Page 9
17
16
3.1
Power and Aerial/Antenna Connections
18
3.2
Direct Connection to a TV
19
3.3
Connection Via an AV Receiver
21
3.4
Other Setup Options
23
2
Tour of Magic TV™
2.3
Front Panel Display
Hard Disk Drive (HDD) space
meter. When the top (red)
segment is lit, the HDD is full
Output Format Indicator, This display
shows 1080i/p, 720p, 576i/p, 480i/p,
50Hz, 60Hz as chosen in Settings >
Video > Video Output Format
Alpha-numeric Display which can
show TV channel information, OSD
mode and clock (in standby) with
am/pm indicator
Recording indicator. Red circle will light
if Magic TV™ is currently recording
Scheduled Recording indicator. Lights when
Magic TV™ has been set to record a future
programme
Playback Indicator. Lights when a
Recorded Programme is being played
Online Indicator. Lights if the
network connection is active
HDMI Output Indicator. Lights
when the HDMI output is active
HDMI Audio indicator. Lights when the
HDMI output contains embedded audio
Live TV Indicator, Lights solidly if the
Signal Quality on current channel is
good. Off or flashing if quality is poor
Power on/Standby
(hold for 4 seconds or more to reboot)
Infra Red receiving area. Keep unobstructed
and in sight of the remote control
Magic TV™ button
(access to all menus)
Navigation of
onscreen menus
E
n
glish
3
Cabling