Scan speed – Pelco ESPRIT ES30C User Manual
Page 36
36
C309M-J (9/04)
SCAN SPEED
The scan speed is adjustable from 1-40 degrees per second. This occurs in three scan modes: auto, random, and frame scan.
To change the scan speed:
1.
Program preset 95 (28). The main menu appears.
2.
Position the cursor (>) beside Other.
3.
Press the Iris Open button to enter the menu entitled Other.
4.
Position the cursor (>) beside Scan Speed deg/s.
5.
Press the Iris Open button. The cursor moves to the right, beside the number of degrees.
6.
Move the joystick up or down to toggle through the number of degrees (1-40) until you reach the number you want. (If set on a low
number, the scan will appear to barely move but is still functioning.)
7.
SELECT – Press the Iris Open button on your keyboard to select your choice.
CANCEL – Press the Iris Close button if you do not want to change the setting.
<Camera>
<Line Sync>
<Power Up>
<Wiper>
<Limit Stop>
<Other>
Exit
MAIN MENU
Proportional pan
On
Park time minutes
0
Scan Speed deg/s
25
Pattern Length
1.5 min
Spd Profile
50 MPH wind
Exit
Other Menu