Pelco ESPRIT ES30C - Manual (Page 37)

C309M-J (9/04) 37
SHARPNESS
Use the Sharpness setting to manually set the sharpness of the camera.
To manually set the sharpness of the camera:
1. Program preset 95 (28). The main menu appears.
2. Position the cursor (>) beside Camera.
3. Press the Iris Open button to enter the Camera menu.
4. Position the cursor (>) beside Next. Press the Iris Open button.
5. Position the cursor (>) beside Sharpness. Press the Iris Open button.
6. Position the cursor (>) beside Sharpness. Press the Iris Open button the cursor moves to the right, beside the numeric value.
7. Move the joystick up or down to a value. As you change the value, you will see the sharpness change. Press the Iris Open button to
select the value, or press the Iris Close button if you do not want to change the setting. If the Auto Sharpness setting is On, it will
change to Off when you select a Sharpness value.
<Camera>
<Line Sync>
<Power Up>
<Wiper>
<Limit Stop>
<Other>
Exit
MAIN MENU
Backlight comp Off
Zoom limit x- -
Reset camera
<Gain/AGC>
<Auto iris>
Next
Exit
Camera Menu
LowLight limit Auto
Shutter speed Auto
Auto focus mode Auto
<Sharpness>
<White balance>
Prev
Exit
Next Menu
Auto Sharpness On
Sharpness 13
Exit
Sharpness Menu