Planet Technology NAS-1100 - Manual (Page 36)

32
Caution: If the NAS-1100 system fails to repair your HD File system, please unplug the HD
and reconnect with a PC with Windows OS. The OS will run Scandisk to repair your HD.
Q5. I use NAS-1100 as a FTP server, but the users outside the LAN can’t access it.
Ans:
u Please make sure NAS-1100 is work with a legal IP address. Or the IP is given by
the network router.
u To use NAS-1100 as a FTP server without fixed IP or domain name, please setup
your DDNS and Port Mapping of router (IP Sharing) first. As for the setting, please
refer to the DDNS and Port mapping in your router’s Manual.
Q6. I can’t access the NAS-1100.
Ans:
u Check the LNK/ACT LED of NAS-1100, and make sure that it’s light on.
u Make the PC IP address is in the same IP segment of NAS-1100.
u If there are already 5 users connected to NAS-1100, the system will block other
users who want to access. Please check the Samba Users / FTP Users by clicking
the “Click here for more information…” on the Web-based UI.
Q7. Why can’t I save a file with size over 2GB to NAS-1100?
Ans:
u NAS-1100 is base on FAT32 file system. Therefore, the size of a single file is
limited to no more than 2GB. However, there is an advantage of FAT32 file system.
If the NAS-1100 is crashed due to some unexpected reasons, you can remove the
hard drive inside and installed it to any Microsoft operating system. The data in the
hard drive still can be accessed as long as the HD is healthy.