Planet Technology NAS-1100 - Manual (Page 9)

5
Chapter 3 Setup Wizard
The Setup Wizard guides you to finish the initial installation of NAS-1100, and the basic
configurations for Network. Please follow the steps as below.
1. Insert the CD-ROM into the CD-ROM drive to initiate the autorun program. Once
completed a menu screen will appear.
2. Click on “Setup Wizard” hyper link to initiate the program. If the menu screen is not shown,
you can click the “Start” button and choose “Run”. When the box appears, enter
“E:\Utility\setup.exe” (Suppose “E” is your CD-ROM drive). You will see the Welcome
screen as below. Please click “Next” to continue.
3. Plug the circle end of power adapter firmly into the rear panel of NAS-1100, and the other
end into a power outlet. Press the Power button on NAS-1100 and make sure Power LED
is light on.