Proxima ASA DP8200x - Manual (Page 8)

6
Connector Panel
The projector provides three computer and three video connectors:
• one M1-D (HD, DVI, and computer)
• two VESA (HD, HD component, and computer)
• one component RCA
• one S-video
• one composite RCA
• one USB mouse (for use with the Computer 2 input only)
• one PS/2 mouse (for use with the Computer 3 input only)
It also has an RS-232 serial connector for serial control and an RJ-45 connec-
tor for networked control via ProjectorNet software. The Command Line
Interface (CLI) specifications and commands are on our website.
A 2.5 mm mini-jack trigger provides a 12 volt DC output. It provides a con-
stant output while the projector is on. If you connect your projection screen
to the trigger with an optional cable, when you turn on the projector the
screen will move down; when you turn the projector off, the screen will
return to the storage position. You must turn this feature on in the System
menu to use it. See page 34.
computer 2 network
audio in
L
computer in
trigger
monitor out
serial control
R
audio in
computer 1 USB PS/2
computer 3
I
O
lock
power
connector
M1-D computer
monitor s-video
composite
computer
audio
external
speakers
(audio out)
RJ-45
PS/2
USB screen
trigger
RS232 serial control
mouse
mouse
VESA computers
component video
video power switch
screen trigger connection
2.5mm mono plug
+12v
ground
to screen relay (see screen manufacturer
for details)