Powermatic 60B - Manual (Page 7)

7
Specifications
Model Number........................................................................ 60B .................................................60B
Stock Number ...............................................................1610077K ........................................1610078K
Table (in.)............................................................... 8-1/2 W x 72 L.................................8-1/2 W x 72 L
Cutting arc (in.) ........................................................................... 3 .....................................................3
Knives, high speed steel ................. three @ 1/8" x 11/16" x 8-1/16" .........three @ 1/8" x 11/16" x 8-1/16"
Knife adjustment .......................................... springs or jack screws ......................springs or jack screws
Maximum speed of cutterhead (RPM) ....................................7,000 .............................................. 7,000
Knife cuts per minute .......................................................... 21,000 ............................................ 21,000
Maximum depth of cut (in.) ....................................................... 1/2 .................................................. 1/2
Maximum rabbeting cut (in.) ................................................ 1/2 x 8 .............................................1/2 x 8
Fence size overall (in.) ..............................................4-3/4 x 38-1/4.................................. 4-3/4 x 38-1/4
Height, floor to outfeed table (in.) ............................................... 32 ................................................... 32
Overall height, without stand (in.) ..........................................14-1/4 ............................................. 14-1/4
Overall height, with stand (in.) ................................................... 38 ................................................... 38
Footprint (in.).............................................................. 24 x 17-1/2 ..................................... 24 x 17-1/2
Motor .................................................................. 2 HP, 1Ph, 230V ........................ 3HP, 3Ph, 230/460V
(pre-wired 230V)
Approx. Net Weight (Jointer Base) (lbs.)....................................280 ................................................. 280
Approx. Net Weight (Stand) (lbs.) .............................................113 ................................................. 116
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, WMH Tool Group reserves the right to change specifications at any time and
without prior notice, without incurring obligations.
Features of the 60B Jointer
Figure 3