Panasonic DP-8025 - Manual (Page 194)

Customizing Your Machine
194
Fax Parameter Table
144 EMAIL Character Set Japanese Selecting the Character Set when receiving, or sending email text.
*English
145 Sender Selection *Invalid Selecting a pre-programmed sender’s name, and email address before
each transmission.
Valid
146 POP Timer 0 to 60 min. Setting the time interval for the machine to check for email on the POP
Server.
(0 = Does not check the POP Server for email.)
147 Auto POP Receive Invalid Selecting whether the machine automatically downloads an email from
the POP Server.
*Valid
148 Del POP Receive Mail Invalid Selecting whether the email will be deleted automatically after retrieval
from the POP Server.
*Valid
149 Del POP Error Mail *Invalid Selecting whether to delete the email that includes an incompatible file
attachment from the POP Server.
Valid
150 Ifax Return Receipt Invalid Selecting whether to send a return receipt when receiving from another
Panasonic Internet Fax.
*Valid
151 EMAIL Header FMT All Selecting the header information to print when an email is received.
(Normally used for Troubleshooting. It shows the path of the email
transmission before arriving at your machine.)
S/F/T
Off
152 Sub-Addr Routing *Invalid Selecting whether to automatically route a received fax, or email using
ITU-T sub-address.
Valid
153 TSI Routing *Invalid Selecting whether to route a received fax to a telephone number, or an
email address preprogrammed in the Address Book using the
originating fax’s Numeric ID (TSI frame information).
Valid
154 Route Header FMT *Originator Selecting the type of email header to be included in the "From" field of
each routed fax.
Originator
: The originating fax machine’s TSI will appear in the
"From" field of the routed email.
Relay Station : The routing station’s email address will appear in the
"From" field of the routed email.
Relay
Station
155 Print Routed Doc *Inc. only Selecting whether a received fax to be routed is always printed, or only
when the routing operation fails.
Always
156 Print Forward Doc *Inc. only Selecting whether a memory received fax, or email to be forwarded is
always printed, or only when forwarding is incomplete.
Always
157 Transaction JRNL *Invalid Selecting whether the machine sends a transaction journal to the
pre-programmed email address.
Valid
* = Factory default setting
No. Parameter Setting Comments