PYLE Audio PLCD26 - Manual (Page 2)

SPECIFICATION
GENERAL
Power requirement................................................................................................DC 13.8V.
Chassis dimensions.......................................................................178[W] X 50[H] X 159[D].
FM SECTION
Frequency range....................................................................................88MHz -108.0MHz.
Usable sensitivity.........................................................................................................10uV.
I.F Frequency........................................................................................................10.7MHz.
AM(MW) SECTION
Frequency range.....................................................................................530KHz - 1700KHz.
LINE - OUT [OPTION]
Output................................................................................250mV @ FM 10% THD POWER.
Impedance............................................................................................................600 ohm.
CD PLAYER
System........................................................................................compact disc audio system.
Usable disc......................................................................................................compact disc.
Signal format.............................................................................sampling frequency 44.1KHz.
No of quantization bits 1bit.
Frequency characteristics...............................................................................5-40Hz < 5dB
10K-20KHz < 5dB.
Signal to noise radio................................................................60dB [1KHz] [IEC - A net work].
Current consumption..............................................................................................7A MAX.
Power output.........................................................................................................4 X 40W
LOCATION AND FUNCTION OF CONTROL
1 2 3 4 5 6
7 13 8 9 10 11 12 14
1. CD ( CD PLAY, PAUSE) BUTTON
At tuner mode, press button to switch to CD mode. At CD mode,
press it to pause the CD program and press it again to resume CD
playback.
2. TRACK UP/DOWN BUTTONS
a. During CD mode, press button allow you to track backwards.
Hold the button allow you to skip backwards.
b. During CD mode, press button allow you to track forwards.
Hold the button allow you to skip forwards.
BASS CONTROL
a. Press the SEL button to select the bass mode until BAS appears on the display.
b. Press + or - to adjust the bass effect.
3. SEL( AUDIO MODE SELECT)/VOLUME +/- BUTTON
Press SEL button to change the mode in the sequence of
a. The volume level can be adjusted at any time by pressing the audio level+ or
- button as select mode has been initially defaulted at volume mode.
b. The volume level is also obtained by stepping through the SEL button until
the function VOL is displayed and then press + or - button to adjust the
sound level.
c. Press and hold the + or - button to adjust the sound level.
VOL BAS TRE BAL FAD
+ +
+ + + +
+ +
FUSED
FILTER
BOX
0.5A &7A
FUSES
YELLOW
ANTENNA PLUG
MEMORY B+
BLACK(GND)
RED (B+)
RCA LINE OUT RED R
WHITE L
FRONT
REAR
RIGHT
SP
BLUE AUTO ANT
FRONT WHITE
WHITE/BLACK
GREEN/BLACK VIOLET/BLACK
GRAY/BLACK
GRAY
VIOLET GREEN
REAR
LEFT
SP
Speaker Connection
12 P
SEL
+
-
MIN
HOUR
VOL
PWR BD MU MO
INT
LOC
RPT
LUD
RDM
EQ CLK
TUNE
OPEN
CD/RECEIVER&ACTIVE DISPLAY
COMPACT
DIGITAL AUDIO