Disc play – PYLE Audio PLCD26 User Manual

Page 4

Advertising
background image

DISC PLAY:

Cleaning discs
Before playing, clean the disc with a clean, lint-free.
Flip the disc in the direction of the arrow.

NOTE:
. Do not use so solvents such as benzine, thinners. Commercially available
cleaners or anti static spray damage the unit.


Insert a disc with the label surface down. Doing so may damage the unit.

NOTE:
. Do not try to insert another disc when one has been already inserted.
Doing so may damage the unit.

Label
surface up

.Handle the disc by its edge. And to keep the disc clean, do not touch
the surface.

.Do not stick paper or tape on the disc.

.Do not expose the disc to direct sunlight or heat sources such as hot air
ducts. Or leave it in a car parked in direct sunlight where there can be a
considerable rise in temperature.

12. LUD/RDM BUTTON

LUD MODE:
When reduce the volume to half level, press it to enhance the bass effect.
RDM MODE:

During CD mode, press " RDM " button and hold for 2 seconds,

it display " RDM " and Random function performs.

IMPORTANT:
MEMORY WIRE ( FOR BACKUP) AND POWER WIRE CAN NOT BE SWITCHED
OFF AT THE SAME TIME, ONCE IT HAPPENS, ALL THE FUNCTION WILL BE
TOTALLY IN DISORDER (DISTORTED DISPLAY IS ALSO INDICATED ).

PLEASE FOLLOW THE INSTRUCTIONS AS MENTIONED

BELOW:

PLEASE SWITCH ON THE MEMORY WIRE FIRST (CAN NOT

PASS THROUGH IGNITION SWITCH) AND THEN SWITCH ON THE POWER. IT WILL
RETURN TO NORMAL FUNCTION SOON.

IF IT REALLY HAPPENS,

5 MINUTES LATER,

13. EQ BUTTON
Press it to switch between 4 preset equalizer curves: FLAT, POP, CLAS,
ROCK. The sound quality will be changed.

11. LOC/RPT BUTTON
LOCAL/DISTANCE MODE:

REPEAT MODE:

During CD mode. Press RPT button to repeat a single track.

Attention: During AM mode, LOC is non-functional.

When in the radio mode, press them to select local or distance broadcast
station receive sensitivity. The word LOC will appear on LCD during local
state.

14. CLOCK ADJUSTMENT BUTTON
During frequency display, press it to change to clock function.
Press the button for more than 2 seconds, until time flashes. and you can adjust
time now.

Press the tune button or continually to adjust Hours and Minutes, when
adjustment is completed, press CLK button to resume normal play state and retain
the adjustment

Advertising