Panduit LS7 - Manual (Page 5)

2
INTRODUCTION AND SAFE OPERATION
The LS7 printer was designed specifical ly to m ake cable, patch panel, faceplat e and facili ty
marking effortless. This palm-sized print er com bines high qual ity thermal transfer print, fas t
loading tape cassettes and indust rial label mat erials to el iminate concerns about l abels fall ing
off.
This manual will gui de you step by st ep through the set-up, operat ion, and troubleshooting of
the LS7 Printer. If you have probl ems not covered herei n, contact your local Panduit Sales
Representati ve or call Panduit Technical Support at 866-871-4571 (outside the US, refer to
page 70 for contact information).
SAFE OPERATION PRACTICES
The foll owi ng general safet y practices supplem ent the specific warnings and cauti ons
depi cted elsewhere in this manual. They are recommended precaut ions that must be
understood and appl ied during the operation and maintenance of this printer.
Do Not Operate In An Explosive Environment
Do not operate t he printer in the presence of flammable gases or fumes. Operation of thi s
pri nter in such an environment cons titutes a definit e safety hazard.
Do Not Operate In Wet Or Damp Areas
Do not operate this printer in wet or damp areas. Operat ion of the print er in such an
envi ronment constitut es a defini te safety hazard.
Do Not Substitute Parts Or Modify Equipment
Because of the danger of int roducing addi tional hazards, do not i nstall substi tute parts or
perform an unauthorized m odification t o the printer or i ts accessories. The proper
com ponents for service and repair may be obtained from Panduit Corp.
WARNING:
When the printer has been i n use for an extended period of tim e, t he printer motor may
become hot. DO NOT touch the printer motor with bare hands.
Patent numbers and patent publicat ion num bers which are relat ed to thi s product are as
fol lows: USP4839742, USP4927278, USP4976558, USP4983058, USP5009530,
USP5069557, USP5120147