PS Audio PD 3.5 - Manual (Page 7)

Specifications
Input:
AC input range
- 95-105 Volts
105-125 Volts
210-250 Volts
(depending on model)
Frequency input - 50/60 Hz
Output:
Frequency
- 50 - 120 Hz
Current - 15 Amps
General
Width
- 17.25 in
Height - 4.25 in
Depth - 13 in
Weight - 14 lbs
Warranty and Service
Inside the U.S. and Canada
PS Audio’s warranty is 3 years parts and
labor, from the date of original purchase. The
warranty follows the product itself regardless of
ownership, new or used.
Outside the U.S. and Canada
PS Audio has authorized distribution in many
countries of the world. In each country, the
authorized importing retailer or distributor
has accepted the responsibility for warranty
of products sold by that retailer or distributor.
Warranty service should normally be obtained
from the importing retailer or distributor from
whom you purchased the product. In the
unlikely event of service required beyond the
capability of the importer, PS Audio will fulfill the
conditions of the warranty. Such product must
be returned at the owner’s expense to the PS
Audio factory. Contact your PS Audio distributor
or the PS Audio customer service department
for more information.
Service issues
Should your unit ever require service or if you
have any technical questions about the Power
Director 3.5, you must either contact your dealer
(PS Audio if purchased direct) or your PS Audio
distributor. No equipment will be received at
our service facilities without an attached RA
number.
If the product was purchased through an
authorized PS Audio dealer or distributor, the
RA number must be obtained by the dealer
or distributor. If the product was purchased
from PS Audio direct, the RA number can
be easily obtained by contacting PS Audio
by phone at 720-406-8946 or by e-mail at
<[email protected]>
7