Paradyne 1740 SHDSL - Manual (Page 21)

1740 SHDSL 2/4-Wire Router User’s Guide
STEP2: select 0/34 from the Current ATM PVC List to display the parameters and click RFC 1483 Routed
and then click on the Modify button.
STEP 3: Click LAN Setup on the menu bar to type the IP address for the LAN port. Click LAN Setup on
the menu bar and type the IP address and Subnet (should be 255.255.255.248 for static five IP address
service) and then click Apply.
Note: After the IP address is changed, your PC and the router are on different network segments.
Therefore, you cannot use the web browser to configure the router . You must change your PC’s IP
address.
1740-A2-GB20-00 July 2004 21