Panasonic DMC-FZ5GN - Manual (Page 24)

Preparation
24
VQT0Q40
POWER SAVE
[1MIN.]/[2MIN.]/[5MIN.]/[10MIN.]:
The power save mode is activated
(the camera is automatically turned
off to save the battery life) if the
camera has not been used for the
time selected on the setting.
[OFF]: The power save mode is not
activated.
• Press the shutter button halfway or turn
the camera off and on to cancel the power
save mode.
• When using the AC adaptor (DMW-CAC1;
optional)/connecting to a PC or a printer/
recording motion images/playing back
motion images/during Slide Show, the
power save mode is not activated.
• In simple mode [ ] (P34), the setting for
the power save mode is fixed to [2MIN.].
BEEP
[ ]: No operational sound
[ ]: Soft operational sound
[ ]: Loud operational sound
• The operational sound setting also affects
simple mode [ ].
SHUTTER
Set to select the volume of shutter sound.
[
]: No shutter sound
[ ]: Soft shutter sound
[ ]: Loud shutter sound
VOLUME
The volume of speakers can be adjusted in
7 steps. (LEVEL 6 to 0)
• When you connect the camera to a TV,
the volume of the speakers of the TV is
not changed.
CLOCK SET
Change date and time. (P21)
NO.RESET
Set this when you want to start the file
number of the picture from 0001 on the
next recording. (The folder number is
updated, and the file number starts from
0001.)
• The folder number can be assigned from
100 to 999.
When the folder number reaches 999, you
cannot reset the file number. We
recommend formatting the card after
saving the data on a PC or elsewhere.
• To reset the folder number to 100, format
the card first and then use this function to
reset the file number.
After that, the reset screen for the folder
number appears. Select [Yes] to reset the
folder number.
• Refer to P97 for detailed information about
the file number and the folder number.
• The file number reset also affects simple
mode [ ].
VQT0Q40ENG.book 24 ページ ２００５年２月１６日 水曜日 午後２時４７分