Panasonic DMC-FZ5GN - Manual (Page 32)

Recording pictures (basic)
32
VQT0Q40
∫ Focusing
• The focus range is 30 cm –
¶ (Wide),
2 m – ¶ (Tele).
• When you press the shutter button fully
with one stroke, pictures may be blurry or
unfocused.
• When the focus indication is blinking, the
subject is not focused. Press the shutter
button halfway and focus on the subject
again.
• If the camera will not focus after a few
tries, turn it off and on and try again.
• In the following cases, the camera cannot
focus on subjects properly.
– When including both near and distant
subjects in a scene.
– When there is dirt or dust on the glass
between the lens and the subject.
– When there are illuminated or glittering
objects around the subject.
– When taking a picture in a dark place.
– When the subject is moving fast.
– When the scene has low contrast.
– When jitter occurs.
– When recording a very bright subject.
We recommend taking pictures using AF/
AE lock (P31) or prefocus (P76). In dark
places, the AF assist lamp (P77) may turn
on to focus on the subject.
• Even if the focus indication appears and
the subject is focused, it is cancelled
when you release the shutter button.
Press the shutter button halfway again.
∫ Jitter (camera shake)
• Be careful of jittering when pressing the
shutter button, especially when fully
zoomed into the subject.
• When jitter could occur because of slow
shutter speed, the jitter alert A appears.
• When the jitter alert appears, we
recommend using a tripod. If you cannot
use a tripod, be careful of how you hold
the camera. (P31)
∫ Direction detection function
• If you take pictures by holding the camera
vertically, the information of the rotation on
the pictures are automatically added and
recorded to the pictures.
When [ROTATE DISP.] (P84) is set to
[ON], you can rotate and display pictures
on the screen or the TV according to the
information of the rotation on the pictures.
• When you take pictures by holding the
camera vertically, read “Tips for taking
good pictures” on P31 carefully.
• This function may not work properly on
pictures recorded by aiming the camera
up or down.
• You cannot use the direction detection
function in motion image mode [ ] and
when you create flip animation.
1/8 F2.8
VQT0Q40ENG.book 32 ページ ２００５年２月１６日 水曜日 午後２時４７分