Multi channel input setup, Zone audio setup, Other settings 10 – Pioneer VSX-9130TXH-K User Manual

Page 71

Advertising
background image

Other Settings

10

71

En

Multi Channel Input Setup

You can adjust the level of the subwoofer for a multi-
channel input.

1

Select ‘Multi Ch In Setup’ from the Other Setup

menu.

2

Select the ‘SW Input Gain’ setting you want.

0dB – Outputs sound of the subwoofer at the level

originally recorded on the source.

+10dB – Outputs sound of the subwoofer at the level

increased by 10 dB.

3

When you’re finished, press RETURN.

You will return to the Other Setup menu.

ZONE Audio Setup

If you’ve made MULTI-ZONE connections (see MULTI-
ZONE listening
on page 61) you may need to specify your
volume setting.

1

Select ‘ZONE Audio Setup’ from the Other Setup

menu.

2

Select the volume level setting.

1

Variable – Use this setting if you’ve connected a

power amplifier in the sub room (this receiver is
simply being used as a pre-amp) and you will be
using this receiver’s controls to adjust the volume.

Fixed – Use this setting if you’ve connected a fully

integrated amplifier (such as another Pioneer VSX
receiver) in the sub room and want to use that
receiver’s volume controls. (This setting is not
available if the surround back system setting is set to
ZONE 2.)

With the Fixed setting, the source is sent from this
receiver at maximum volume, so make sure the volume is
quite low in the sub zone at first, and then experiment to
find the correct level.

3

When you’re finished, press RETURN.

You will return to the Other Setup menu.

7.Other Setup

:Return

a . Multi Ch In Setup

b . ZONE Audio Setup
c . SR+ Setup
d . HDMI Control Setup
e . OSD Adjustment

7a.Multi Ch In Setup

SW Input Gain

0dB

Video Input

[ BD ]

:Finish

Note

1 If you selected ZONE 2 in the Surround back speaker setting on page 41, you won’t be able to change the volume level.

7.Other Setup

:Return

a . Multi Ch In Setup

b . ZONE Audio Setup

c . SR+ Setup
d . HDMI Control Setup
e . OSD Adjustment

7b.ZONE Audio Setup

ZONE 2 Volume Level

Variable

B e c a r e f u l o f l o u d
vo l u m e w h e n " F i xe d "
i s s e l e c t e d .

:Finish

VSX-9130TXH_KU.book 71 ページ 2008年4月17日 木曜日 午前11時26分

Advertising