Plinius Audio SB-301 - Manual (Page 13)

11 POWER AMPLIFIER
Installation & Operation
WARNING: RISK OF ELECTRIC SHOCK. TERMINALS MARKED WITH
SHOULD BE CONSIDERED HAZARDOUS LIVE AT ALL TIMES.
This amplifier operates at hazardous voltage levels. We recommend that any work
requiring removal of the lid be referred to a suitably qualified and experienced service
technician. DO NOT place this amplifier in any position where liquids or any foreign
material may accidentally enter it.
PLEASE READ & UNDERSTAND THE PRECAUTIONS WITHIN THIS MANUAL
FOR PLACEMENT & OPERATION OF THIS PRODUCT.
CONNECTIONS
Connections to your Plinius SB-301 MKII should be made in the same order as they
are listed in this section. DO NOT attempt to connect your Plinius SB-301 MKII until you
have read and fully understood these instructions. Although these instructions refer
to the connection of a preamplifi er, the SB-301 MKII can also be safely installed into
multimedia systems by following the same installation guidelines. Should you require
any further assistance, please contact your Plinius dealer.
IMPORTANT: DO NOT POWER UP YOUR AMPLIFIER UNTIL YOU HAVE
CONNECTED YOUR INPUT/OUTPUTS CORRECTLY FOR YOUR SYSTEM.
PREAMPLIFER INPUTS
Connect your preamplifier to the input of the Plinius SB-301 MKII using suitable single-
ended RCA or Balanced XLR interconnect cables only. If using single-ended RCA
inputs, connect your Preamplifier to the RCA inputs on the back of the Plinius SB-
301 MKII. Make sure you connect the red coded cable to the red RIGHT RCA input,
and the black (or white) cable to the black LEFT RCA input. Also make sure the RCA
connectors are a snug fit and are inserted all the way in.
For XLR input connection, make sure you connect the RIGHT XLR input and LEFT
XLR inputs to the right and left outputs from your Preamplifier respectively. Use
the Amplifi er Confi guration Selector switch to select RCA STEREO if you are using
unbalanced RCA inputs or to select XLR STEREO if you are using balanced XLR inputs.
NOTE: DO NOT connect XLR and RCA at the same time, use only one or the other.
PREAMPLIFIER SB-301 MKII INPUTS