Inserting the battery – Panasonic DMC-FZ2PP User Manual

Page 12

Advertising
background image

Preparation

12

Inserting the Battery

[Preparation]
• Check that the power switch is set to [OFF]

and the lens is retracted.

• Close the flash. (P37)

[Inserting the battery]

1

Slide the lever in the direction of the
arrow to open the Memory Card/
battery door.

2

Insert the charged battery all the way
in, until it is locked.

3

Close the Memory Card/battery door.

[Removing the battery]

1

Open the Memory Card/battery door.

2

Slide the lock

1 in the direction of the

arrow to remove the battery.

3

Close the Memory Card/battery door.

• If you will not be using the camera for a long

time, remove the battery.

• When the fully charged battery is inserted in

the camera for more than 1 hour, the clock
setting is memorized by the camera for
about 24 hours even after the battery is
removed. (The time may be shorter if the
battery is not charged sufficiently.)
When the clock setting is cancelled, please
set the date/time again. (P28)

• When the card is being accessed, do not

open the Memory Card/battery door.

• The battery supplied with this camera is

exclusively designed for this camera. Do not
use with any other equipment.

CAUTION

Danger of explosion if battery is
incorrectly replaced. Replace only with the
same or equivalent type recommended by
the manufacturer. Dispose of used
batteries according to the manufacturer’s
instructions.

3

2

3

2

OPEN

OPEN

FZ2-PP.book 12 ページ 2003年9月26日 金曜日 午後12時1分

Advertising