Panasonic DMC-FZ2PP - Manual (Page 85)

Technical use
85
Resetting the File Number
As the file numbers are recorded sequentially
by the camera, when you use two or more
cards, it may happen that the file numbers on
your cards do not start from 0001.
Use this function when you insert a new card
or perform a new recording on the recorded
card and you want to start recording from the
file number 0001.
[Preparation]
• Set the mode dial except for [
]/[ ].
(P25)
1 Press the [MENU] button.
2 Press 1 to open the setup menu.
3 Press 3/4 to select [NO.RESET] and
then press 1.
4 When this message is displayed
“RESET FILE NO. IN THE CAMERA?”,
press
2 to select [YES].
5 Press the 4/[REVIEW/SET] button.
6 Press the [MENU] button.
• The menu will disappear.
1,6
2,3,4,5
3
CLOCK SET
LANGUAGE
REC
NO.RESET
SETUP 2/2
RESET
ENG
SELECT SET EXIT MENU
4
SELECT SET
NO.RESET
RESET FILE NO.
IN THE CAMERA?
YES NO
FZ2-PP.book 85 ページ ２００３年９月２６日 金曜日 午後１２時１分