Profoon Telecommunicatie TX-255 - Manual (Page 11)

9 12
e. To delete a single number in the phone book:
f. To copy the Caller ID numbers and last 10 dialled numbers to
phonebook
During the reviewing process, use button to select the
number you want to delete, press the button once, the LCD
shows Press the button again to delete it.
When the LCD shows the CID or last 10 dialled number, press and hold
button for about 3 seconds to add the number to phonebook. The
first character of the name will flash to indicate you can modify it, you
can do it then press the
button to confirm and enter the next new
number adding, press the button to exit.
the
DEL
DEL? DEL
DEL
DEL
or
Press the button to enter the LCD contrast setting when the LCD
shows , then the current contrast level ( ) will
show on the LCD. Press or button to make a selection, press
the button to confirm and exit.
Press the button when the LCD shows , use or button
to select the correct number. Press the button to confirm and move
to the next digit, press button to exit.
2. LCD CONTRAST SETTING
3. TIME SETTING
LCD CONTRAST HI/LO
SET TIME
NOTE:
When you receive a call to this unit, time and date will be
set automatically if you have Caller ID service (FSK standard).
or
The setting sequence is
After the
setting, the cursor for will flash, you can use
the button to activate/deactivate this setting. If it is activated,
the will set automatically, or in stead of showing the week day,
the LCD will only show the in the standby state.
The need to be selected to ensure the week displays correct.
hour - minute - month - day - year - week.
year week
week
year
TOTAL CALLS XX
1.
l
l
l
Review the number in one-touch memory
Dial a number from the one-touch memory
Copy the CID or last 10 dialled or phone book number to
M1~M3
SAVE OK
VOL+ VOL-
P/T
P
T
In the state of on-hook, press the location button (M1~M3) once,
the LCD will show the matching number.
Lift the handset or press the button, then press the location
button (M1~M3) to dial the number.
*When the number shows on the LCD, press and hold the location
button (M1~M3) until the LCD shows
, now the number
has been stored in the memory.
You can store 70 numbers and names in the phone book, refer to
"FUNCTION OPERATIONS", section "PHONEBOOK" for details.
During conversation with handset or speakerphone, you can press the
or button to adjust the desired handset receiving or
speaker volume (there are 4 levels for selecting).
Set the dialling mode switch to the desired position ( ) to select the
dialling mode. For tone dialling mode, move the switch to the
position. For pulse dialling mode, move the switch to the position.
8. Phone Book Function
9. Handset Receiving And Speaker Volume Adjustment
10. Dialling Mode Selection
2.
3.