Profoon Telecommunicatie TX-255 - Manual (Page 5)

CHECK THE CONTENTS OF THE BOX
BATTERY INSTALLATION
NOTE:
CONNECTING LINE CORDS
Box should contain:
Handset with handset cord and phone base
Telephone line cord
4 AA size 1.5V batteries
User's manual
Bracket
The Caller ID phone requires four 1.5V AA size batteries for LCD display.
1. Remove the battery cover from the back of your Caller ID phone
2. Insert four 1.5V AA size batteries by observing the +/- polarity
marked in the compartment.
3. Replace battery compartment cover.
You can also insert an adaptor for the LCD display (optional).
Plug one end of the supplied modular cord into the line jack. Then
plug the other end into telephone line jack.
l
l
l
l
l
INTRODUCTION
3
l
the
the
the
Using the call back feature
A. Call back the dialled number: The unit can store up to 10 dialled
numbers.
B. Call back the called number: The unit can store minimum 76
called numbers.
(NOTE: If the number is blocked or is
not available, it can not be call backed.)
1. In the state of on-hook, press the button once, the last dialled
number will show on the LCD, then use button to select the
number that you want to dial out.
2. Pick up the handset or press
button, the phone number can be
dialled out automatically.
1. Lift the handset or press button, listen for a dial tone.
2. Select the caller that you want to call back by pressing
button.
3. Press the
button to dial the phone number shows on the LCD .
In the state of on-hook, use button to select the call you
want to call back, then pick up the handset or press the button, the
phone number can be dialled out automatically.
Or
or
or
or
18