Panasonic SA-XR10 EN - Manual (Page 12)

12
RQT6501
Control guide
q q [RECEIVER ^ ]:
Standby/on button
!0
w w [SOUND MODE]:
To select the sound modes
!0
e e [SFC]:
To select SFC modes
!1
r r [CHANNEL, 1 , 2 ]:
To select preset radio channels
!9
t t [1-0, > =10/ENTER]:
To enter radio frequencies
!8
and channels
!9
y y [DIRECT TUNING/DISC]:
To enable selection of radio stations by frequency
!8
u u [L BALANCE R]:
To adjust front speaker balance
i i [DVD, TV, VCR, TUNER/BAND RECEIVER]:
Input and remote control mode buttons
!0
.
DVD: to switch input and remote control mode to DVD
TV: to switch input and remote control mode to TV
VCR: to switch input and remote control mode to VCR
TUNER/BAND RECEIVER: to switch input and remote control
mode to RECEIVER and to change the
radio band
¡ These buttons light when you press other buttons to indicate the
current remote control mode.
o o [INPUT SELECTOR]:
To select the input source
!0
! !00 [DIGITAL]:
To switch between analog and digital TV/DVD input
!0
! !11 [MUTING]:
To mute the volume
! !22 [SUBWOOFER]:
To adjust subwoofer level
¡ Adjust the level in 5 steps
SW MIN, SW 5, SW 10, SW 15, and SW MAX.
Select SW – – – to stop output.
! !33 [VOLUME, +, –]:
To adjust the volume
!0
! !44 [TEST]:
To start the speaker signal
o
! !55 [TONE]:
To select bass and treble to allow adjustment with [–, +]
! !66 [DELAY, LEVEL]:
To select speaker delay time
!1
and output level
o
to allow
adjustment with [–, +]
! !77 [–, +]:
To change settings
! !88 [TIMER]:
To select and set the sleep or wake timer to allow setting with
[–, +]
@0
! !99 [DVD 6CH]:
To switch DVD 6-channel input mode on or off.
You need to use DVD 6-channel input to enjoy multichannel linear
PCM in DVD-AUDIO.
Operating the receiver
SUBWOOFER SFC
TOP MENU MENU
TV VCR
RETURN
PAUSE STOP
SOUND MODE CHANNEL VOLUME
PLAY
/SEARCH SKIP
DISPLAY
MUTING
ENTER
TEST 3
6
2
5
1
4
9 8 7
0 10/ENTER
TONE
DELAY
LEVEL
TIMER TV/VIDEO
REPEAT
DVD
L BALANCE R
A-B
REPEAT MARKER
TV VOL
SUB TITLE SETUP AUDIO ANGLE
POSITION
MEMORY
DVD
GROUP PAGE DVD 6CH
DIGITAL
TUNER/
BAND
RECEIVER
1
2
3
4
5
6
7
8
9
10
11
14
15
16
12
13
17
18
19
DIRECT TUNING/
DISC
RECEIVER
INPUT
SELECTOR
SLOW
Reference pages are shown as black circled numbers !0 . Remote control
For your reference
¡ Once you have set a mode (Sound mode, digital/analog input, or
2-channel/6-channel input for DVD) for an input source
That mode is engaged whenever you reselect the input source.
¡ When DVD 6CH input is on
Speaker settings are ineffective. Change the settings on the DVD
player if necessary.
¡ To adjust the tone
The STEREO mode must be on and input must be either analog or
PCM signals. You cannot adjust the tone if DVD 6CH is selected.
¡ When using the subwoofer
Sound can be distorted if you raise the volume while subwoofer
level is high. Reduce subwoofer level if this occurs.
¡ Muting
Muting is also canceled when the unit is turned off.
Operations