Panasonic SA-XR10 EN - Manual (Page 8)

8
RQT6501
C hange the settings to suit your speakers and units to the environment
in which you are using them. Before making any changes, read the
descriptions of the settings, note the factory settings and ranges, and
refer to the equipment’s instructions.
Enter the setting mode.
Set the size to suit your speakers
LARGE: For speakers that can
reproduce a full sound range,
particularly the bass range
below 100 Hz.
SMALL: For speakers that cannot
adequately reproduce the bass
range. This setting is sufficient
for most speakers if you are
using a subwoofer.
NONE: For speakers you haven’t
connected (center or surround).
The factory settings are:
FRONT: LARGE
CENTER and SURROUND: SMALL
For the subwoofer (SUB-WFR), select
YES if you have connected one (factory
setting), or NO if you have not.
1
POWER 8
SUBWOOFER SFC
DVD
TOP MENU MENU
TV VCR
RETURN
PAUSE STOP
SOUND MODE CHANNEL VOLUME
PLAY
/SEARCH SKIP
DISPLAY
MUTING
ENTER
TEST 3
6
2
5
1
4
9 8 7
0 DIRECT TUNING/
DISC 10/ENTER
TONE
DELAY
LEVEL
TIMER TV/VIDEO
REPEAT
DVD
L BALANCE R
A-B
REPEAT MARKER
TV VOL
SUB TITLE SETUP AUDIO ANGLE
POSITION
MEMORY
VOLUME
TEST
LEVEL
GROUP PAGE DVD 6CH
DIGITAL
TUNER/
BAND
INPUT
SELECTOR
RECEIVER
RECEIVER
SLOW
MEMORY TUNE MODE 2 TUNING 1
Display
POWER 8
MEMORY TUNE MODE
MEMORY
TUNE MODE
Press at the
same time.
Select “SIZE”.
Select the speaker.
Change the setting.
MEMORY TUNE MODE
2 TUNING 1
Exit the setting mode. Press at the
same time.
Repeat
SIZE
Settings
Step
1 2
3
4
Step 3
Repeat these steps for each speaker
channel.