The sleep timer, The timer fader, Reference – Panasonic RX-ES20 User Manual

Page 19: Maintenance

Advertising
background image

19

RQT5189

The Sleep Timer

Remote control only

You can set the unit to turn off after certain time. (e.g. when you
want to fall asleep while listening to music.)

Press [SLEEP] to select the time (minutes).

Each time you press the button:

To cancel

Press [SLEEP] to select “SLEEP OFF”.

To check the remaining time

Press [SLEEP] once.
The remaining time is shown for about 5 seconds.

To change the setting

Press [SLEEP] to select the new time.

Note

You can use sleep timer in combination with play and record timer.
Make sure the unit is off before the play/record timer’s start time.

The Timer Fader

Remote control only

Volume increases slowly to the set level when a timer turns the unit
on and decreases slowly when the sleep timer turns the unit off.

Press [TIMER FADER] to display

.

(All timers will be affected.)
Press again to cancel.

Note

This feature does not affect record timer’s recordings.

Maintenance

If the surfaces are dirty

To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dipped in a soap-
and-water solution or a weak detergent solution.

• Never use alcohol, paint thinner, or benzine to clean this unit.
• Before using chemically treated cloth, read the instructions that

came with the cloth carefully.

For a cleaner crisper sound

Clean the heads after every 10 hours of use to assure good quality
playback and recording.
Use a cleaning tape (not included).

A

B

Reference

Timer

7

A

Time setting

SLEEP TIMER FADER DISPLAY

2

3

PGM/-CLEAR

1

5

6

10

4

8

9

0

7

SLEEP

SLEEP

7

B

SLEEP TIMER FADER DISPLAY

2

3

PGM/-CLEAR

1

5

6

10

4

8

9

0

7

TIMER FADER

TIMER FADER

30

SLEEP OFF

SLEEP

60

SLEEP

90

SLEEP

120

SLEEP

Advertising