Philips DVD VIDEO/ SACD PLAYER DVP900SA/00_A - Manual (Page 14)

/00_3139 246 13872
English
14
Connections
Optional: Connecting to a Digital
Receiver
S-VIDEO
Y Pb Pr
MIXED 2CH
L L
R
COMPONENT
SCAN MODE
INTERLACE
PROGRESSIVE
VIDEO
VIDEO OUT
HDMI PCM / DIGITAL/
DTS / MPEG
COAXIAL OPTICAL
DIGITAL OUT
R
AU
AV
AUDIO
IN
COAXIAL
OPTICAL
Receiver
OR
Receiver has a PCM, Dolby Digital,
or MPEG2 decoder
1
Select one of the video connections to
your TV (CVBS VIDEO IN, S-VIDEO IN,
or COMPONENT VIDEO IN) depending
on the options available on your TV.
2
Connect either the COAXIAL or
OPTICAL jack of the DVD Player to the
corresponding Digital Audio In jack on
your Receiver
(cable not supplied).
3
Set the DVD Player’s Digital Output to
PCM-ONLY or ALL depending on the
capabilities of your Receiver
(see page 34
{DIGITAL OUTPUT}).
Helpful Hints:
–
If the audio format of the digital output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
Stereo has Dolby Pro Logic or Right
/ Left Audio In jacks
1
Select one of the video connections to
your TV (CVBS VIDEO IN, S-VIDEO IN,
or COMPONENT VIDEO IN) depending
on the options available on your TV.
2
Set the PROGRESSIVE/INTERLACE
switch to INTERLACE for CVBS or S-
VIDEO connections.
3
Set the PROGRESSIVE/INTERLACE
switch to PROGRESSIVE for
COMPONENT VIDEO IN connection
with a Progressive Scan TV.
4
Use the audio cables (white/red) to
connect AUDIO OUT (L/R) jacks of
the DVD Player to the corresponding
AUDIO IN jacks on the stereo system
(cable not supplied).
Helpful Hint:
–
For optimum stereo sound quality, always
connect Left and Right channel from the
multi-channel output and set [Analog
Output] setting to ‘STEREO’, see page 32).
S-VIDEO
Y Pb
MIXED 2CH MAIN
CENTER
SUB WOOFER
6CH DISCRETE SURROUND
L L
R
L
R
COMPONENT
EO
VIDEO OUT
PCM / DIGITAL/
DTS / MPEG
COAXIAL OPTICAL
DIGITAL OUT
R
AUDIO OUT
AV
AUDIO
IN
STEREO
DIGITAL
OPTICAL
Optional: Connecting to an
Audio System
01-41 DVP900_00A1 15/09/2004, 10:00 AM 14