Philips DVD VIDEO/ SACD PLAYER DVP900SA/00_A - Manual (Page 9)

/00_3139 246 13872
English
9
Connections
Connecting TV
S-VIDEO
Y Pb Pr
MIXED 2CH MAIN
CENTE
SUB WOO
6CH DISCR
L L
R
COMPONENT
SCAN MODE
INTERLACE
PROGRESSIVE
VIDEO
VIDEO OUT
PCM / DIGITAL/
DTS / MPEG
COAXIAL OPTICAL
DIGITAL OUT
R
AUDIO OUT
AV
AUDIO
OUT S-VIDEO IN
VIDEO IN SCART/RGB IN
AUDIO IN
S-VIDEO IN
VIDEO IN
SCART/RGB IN
1
IMPORTANT!
– You only need to make one video
connection from the following
options, depending on the
capabilities of your TV system.
– Connect the DVD system directly
to the TV.
– RGB connection will let you use
the features of both the Audio and
Video in the DVD Player.
Using SCART jack
●
Use the SCART cable (black) to connect
the DVD Player’s SCART jack (AV) to the
corresponding Scart input jacks on the TV
(cable supplied).
Helpful Hint:
–
Ensure that the “TV” indication on
SCART cable is connected to the TV
set and “DVD” indication on SCART
cable is connected to the DVD Player.
S-VIDEO
Y Pb Pr
MIXED 2CH MAIN
CENTER
SUB WOOFER
6CH DISCRETE SURRO
L L
R
COMPONENT
SCAN MODE
INTERLACE
PROGRESSIVE
VIDEO
VIDEO OUT
PCM / DIGITAL/
DTS / MPEG
COAXIAL OPTICAL
DIGITAL OUT
R
AUDIO OUT
AV
AUDIO IN Pr/Cr
Pb/Cb
Y
S-VIDEO IN
VIDEO IN
COMPONENT VIDEO IN
AUDIO IN Pr/Cr Pb/Cb Y
S-VIDEO IN
VIDEO IN
COMPONENT VIDEO IN
IN
IN
3 1
2
Back of TV
IMPORTANT!
– You only need to make one video
connection from the following
options, depending on the
capabilities of your TV.
– Connect the DVD Player directly
to the TV.
Using Composite Video jack
(CVBS)
1
Use the supplied composite video cable
(yellow) to connect the DVD Player’s
yellow VIDEO OUT (CVBS) jack to
the VIDEO IN jack (labeled as Video In,
Composite, CVBS, or Baseband) on the
TV
(cable not supplied).
2
Set the SCAN MODE switch to
INTERLACE.
3
To hear the sound of this DVD Player
through your TV, use the audio cables
(white/red) to connect AUDIO OUT (L/
R) jacks of the DVD Player to the
corresponding AUDIO IN jacks on the TV
(cable not supplied).
01-41 DVP900_00A1 15/09/2004, 10:00 AM 9