How to position your eyes in the mirror – Panasonic BM-ET300AE User Manual

Page 21

Advertising
background image

21

OPERATING PROCEDURES (INSTRUCTIONS FOR IRIS CAMERA USERS)

1. Stand where you can see the iris camera

from the front side.

Stand where you can hold the tilt handles with your
arms bent moderately. If you are standing within the
recognition range, an ellipse symbol will appear at the
centre of the mirror.

• The recognition range is within approx. 30 cm to

40 cm {0.98 ft. to 1.32 ft.} away from the iris cam-
era.

• The recognition area differs depending on users.

However, the approximate recognition area is
where you can stand holding the tilt handles with
your arms bent moderately.

This section explains how to use the iris camera, register the iris data in the iris server, and recognize yourself with a recogni-
tion camera in the following order.

• How to position your eyes in the mirror
This is a fundamental operating procedure. Please read here before enrollment and recognition to facilitate the operating pro-
cedures.

• How to carry out enrollment
For iris recognition, you need to make the iris camera capture your iris image and enroll your iris data in the iris server. This
procedure explains how to enroll the iris data in the iris server using the iris camera. Follow the direction of system administra-
tors or operators when you carry out iris data enrollment.

• How to carry out recognition
This procedure explains how to recognize yourself with the iris camera after enrollment.

• How to recognize yourself with the iris camera and a card reader
This procedure explains how to recognize yourself with the iris camera and a card reader after enrollment.

How to Position Your Eyes in the Mirror

This iris camera captures the iris data of both eyes at one time. If the eyes are not positioned within the capturing range, enroll-
ment/recognition will be invalid. Before enrollment/recognition, you (the user) should stand in front of the camera as follows
and adjust your eye position. Even when you carry out enrollment/recognition while sitting, you should adjust your eye position
in the same way.
Note: If your eye position is higher than the upside limit, bend down. If your eye position is lower than the upside limit, get on a

pedestal, etc.

1

Dista

nce b

etwee

n

the e

yes a

nd m

irror:

appro

x. 30 c

m to 4

0 cm

{0.98

ft. to 1

.32 ft.}

35

°

15

°

Advertising