Pioneer V7300D - Manual (Page 3)

Introduction
Congratulations on your purchase of a NextWindow 2403 Touch Panel Overlay. This Guide explains a
few simple steps to set up the touch screen to work with the following Pioneer DVD players:
Pioneer DVD-V7300D
Pioneer DVD-V7400D
(Note: For the Pioneer DVD-V5000, email [email protected] for further information.)
To install the touch overlay onto a display screen, see the NextWindow Touch Panel Overlay 2403
Installation Guide supplied with the product.
In addition to the components that came with the 2403 Touch Panel Overlay, you will need the following:
• Computer. For example, a laptop.
• NextWindow’s USB Config program, which can be downloaded from NextWindow’s website.
• Serial cable suitable for connecting the Pioneer DVD player to the touch screen.
Overview of Procedure
There are three parts to setting up the touch screen to work with the DVD player:
• Configure the touch screen.
• Connect the touch screen to the DVD player.
• Calibrate the touch screen.
These steps are explained below.
2