Pioneer V7300D - Manual (Page 4)

Configuring the Touch Screen
To configure the touch screen, you need to run NextWindow’s configuration program, USB Config, on a
computer that is connected to the touch screen via a USB cable.
USB Config is part of the Touch+ software suite, which can be downloaded from NextWindow’s website:
http://nextwindow.com/support/software/index.html.
1. Connect the 12 VDC power to the touch screen.
2. Connect the USB cable from the PC to the touch screen. The Windows operating system will
automatically detect the USB device.
3. Run USB Config and go to the Serial tab.
4. Select Pioneer DVD.
5. Click [Save].
6. Close USB Config.
7. Disconnect the USB cable so that the touch screen can communicate with the DVD player via the
serial interface.
3